<?xml version="1.0" encoding="utf-8"?>
<!-- Created with exoImplantEditor CAD [Engine build 7380] [<64-Bit>]  -->
<ImplantLibraryEntry xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
  <Supplier>Paltop®</Supplier>
  <SupplierLink>https://paltopdental.com/</SupplierLink>
  <WarrantyInformation>DISCLAIMER OF WARRANTY


THIS DATA IS PROVIDED "AS IS" AND WITHOUT WARRANTIES AS TO PERFORMANCE, ACCURACY, OR MERCHANTABILITY. THE SELLER'S SALESPERSONS MAY HAVE MADE STATEMENTS ABOUT THIS DATA. ANY SUCH STATEMENTS DO NOT CONSTITUTE WARRANTIES AND SHALL NOT BE RELIED ON BY USER IN DECIDING WHETHER TO USE THIS DATA.

THIS DATA IS PROVIDED WITHOUT ANY EXPRESSED OR IMPLIED WARRANTIES WHATSOEVER. BECAUSE OF THE DIVERSITY OF CONDITIONS AND HARDWARE UNDER WHICH THIS DATA MAY BE USED, NO WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE IS OFFERED. THE USER IS ADVISED TO TEST THE DATA THOROUGHLY BEFORE RELYING ON IT. THE USER MUST ASSUME THE ENTIRE RISK OF USING THIS DATA AND ACCEPTS IT "WITH ALL ITS FAULTS". THE USER MUST ASSUME THE ENTIRE RISK OF USING THE PROGRAM.
</WarrantyInformation>
  <DisplayInformation>Paltop® - Fully Guided Kit</DisplayInformation>
  <Keyword>PT_KIT_01</Keyword>
  <LibraryType>SurgicalKit</LibraryType>
  <TypeConfig>
    <ImplantTypeConfig Type="Drill">
      <DrillDiameter>2</DrillDiameter>
      <DisplayInformation>Ø 2.0 mm</DisplayInformation>
      <Keyword>PT_DRILL_20</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <DrillLength>20</DrillLength>
          <ReferenceColor>#5A3219</ReferenceColor>
          <DrillMeshFilename>30-70306.sdfa</DrillMeshFilename>
          <DisplayInformation>20 mm</DisplayInformation>
          <Keyword>200</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DrillLength>25</DrillLength>
          <ReferenceColor>#64285A</ReferenceColor>
          <DrillMeshFilename>30-70312.sdfa</DrillMeshFilename>
          <DisplayInformation>25 mm</DisplayInformation>
          <Keyword>250</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DrillLength>30</DrillLength>
          <ReferenceColor>Silver</ReferenceColor>
          <DrillMeshFilename>30-70318.sdfa</DrillMeshFilename>
          <DisplayInformation>30 mm</DisplayInformation>
          <Keyword>300</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig Type="Drill">
      <DrillDiameter>3.25</DrillDiameter>
      <DisplayInformation>Ø 3.25 mm</DisplayInformation>
      <Keyword>PT_DRILL_33</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <DrillLength>20</DrillLength>
          <ReferenceColor>#5A3219</ReferenceColor>
          <DrillMeshFilename>30-70307.sdfa</DrillMeshFilename>
          <DisplayInformation>20 mm</DisplayInformation>
          <Keyword>200</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DrillLength>25</DrillLength>
          <ReferenceColor>#64285A</ReferenceColor>
          <DrillMeshFilename>30-70313.sdfa</DrillMeshFilename>
          <DisplayInformation>25 mm</DisplayInformation>
          <Keyword>250</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DrillLength>30</DrillLength>
          <ReferenceColor>Silver</ReferenceColor>
          <DrillMeshFilename>30-70319.sdfa</DrillMeshFilename>
          <DisplayInformation>30 mm</DisplayInformation>
          <Keyword>300</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig Type="Drill">
      <DrillDiameter>3.75</DrillDiameter>
      <DisplayInformation>Ø 3.75 mm</DisplayInformation>
      <Keyword>PT_DRILL_38</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <DrillLength>20</DrillLength>
          <ReferenceColor>#5A3219</ReferenceColor>
          <DrillMeshFilename>30-70308.sdfa</DrillMeshFilename>
          <DisplayInformation>20 mm</DisplayInformation>
          <Keyword>200</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DrillLength>25</DrillLength>
          <ReferenceColor>#64285A</ReferenceColor>
          <DrillMeshFilename>30-70314.sdfa</DrillMeshFilename>
          <DisplayInformation>25 mm</DisplayInformation>
          <Keyword>250</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DrillLength>30</DrillLength>
          <ReferenceColor>Silver</ReferenceColor>
          <DrillMeshFilename>30-70320.sdfa</DrillMeshFilename>
          <DisplayInformation>30 mm</DisplayInformation>
          <Keyword>300</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig Type="Drill">
      <DrillDiameter>4.2</DrillDiameter>
      <DisplayInformation>Ø 4.2 mm</DisplayInformation>
      <Keyword>PT_DRILL_42</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <DrillLength>20</DrillLength>
          <ReferenceColor>#5A3219</ReferenceColor>
          <DrillMeshFilename>30-70309.sdfa</DrillMeshFilename>
          <DisplayInformation>20 mm</DisplayInformation>
          <Keyword>200</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DrillLength>25</DrillLength>
          <ReferenceColor>#64285A</ReferenceColor>
          <DrillMeshFilename>30-70315.sdfa</DrillMeshFilename>
          <DisplayInformation>25 mm</DisplayInformation>
          <Keyword>250</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DrillLength>30</DrillLength>
          <ReferenceColor>Silver</ReferenceColor>
          <DrillMeshFilename>30-70321.sdfa</DrillMeshFilename>
          <DisplayInformation>30 mm</DisplayInformation>
          <Keyword>300</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig Type="Drill">
      <DrillDiameter>5</DrillDiameter>
      <DisplayInformation>Ø 5.0 mm</DisplayInformation>
      <Keyword>PT_DRILL_50</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <DrillLength>20</DrillLength>
          <ReferenceColor>#5A3219</ReferenceColor>
          <DrillMeshFilename>30-70310.sdfa</DrillMeshFilename>
          <DisplayInformation>20 mm</DisplayInformation>
          <Keyword>200</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DrillLength>25</DrillLength>
          <ReferenceColor>#64285A</ReferenceColor>
          <DrillMeshFilename>30-70316.sdfa</DrillMeshFilename>
          <DisplayInformation>25 mm</DisplayInformation>
          <Keyword>250</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DrillLength>30</DrillLength>
          <ReferenceColor>Silver</ReferenceColor>
          <DrillMeshFilename>30-70322.sdfa</DrillMeshFilename>
          <DisplayInformation>30 mm</DisplayInformation>
          <Keyword>300</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig Type="Drill">
      <DisplayInformation>Ø 2.0 mm Pilot Drill</DisplayInformation>
      <Keyword>PT_DRILL_20_PILOT</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <DrillLength>27.5</DrillLength>
          <DrillDiameter>2</DrillDiameter>
          <ReferenceColor>Silver</ReferenceColor>
          <DrillMeshFilename>30-70305.sdfa</DrillMeshFilename>
          <DisplayInformation>Short</DisplayInformation>
          <Keyword>100</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig Type="DrillHandle">
      <OfficialOuterDiameter>5.05</OfficialOuterDiameter>
      <OfficialInnerDiameter>2.4</OfficialInnerDiameter>
      <OfficialDepthOffset>0</OfficialDepthOffset>
      <DepthOffset>0</DepthOffset>
      <DrillHandleFilename>30-70600.sdfa</DrillHandleFilename>
      <DisplayInformation>DGS Wide</DisplayInformation>
      <Keyword>DGSW</Keyword>
    </ImplantTypeConfig>
    <ImplantTypeConfig Type="DrillHandle">
      <OfficialOuterDiameter>4.05</OfficialOuterDiameter>
      <OfficialInnerDiameter>2.4</OfficialInnerDiameter>
      <OfficialDepthOffset>0</OfficialDepthOffset>
      <DepthOffset>0</DepthOffset>
      <DrillHandleFilename>30-70616.sdfa</DrillHandleFilename>
      <DisplayInformation>DGS Narrow</DisplayInformation>
      <Keyword>DGSN</Keyword>
    </ImplantTypeConfig>
  </TypeConfig>
  <SignatureDate>2020-03-20T11:14:00.5152150Z</SignatureDate>
  <InfoSignatureV3> </InfoSignatureV3>
  <InfoSignatureV4> </InfoSignatureV4>
  <FileSignatures xmlns="exocad://DentalConfig">
    <!--  NOTE! Signature is provided ONLY for specific mesh properties -->
    <!--  NOT for accuracy or suitability to a particular task.         -->
    <!--  A valid signature from the software vendor does NOT imply any -->
    <!--  warranties or statements regarding the data's correctness!    -->
    <FileSignature>
      <Filename>30-70305.sdfa</Filename>
      <Signature>iOEg56akiiXZIPSqGhD+9D1GoQOlBSKqNug6mPr+iwBxnk+L2oP07SQ5kIcZzmsBdKdA8qUQI22RghaVXQ47Cw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>30-70306.sdfa</Filename>
      <Signature>HZcWzoC5QA3c3LD7Xsi/xL7zG6SfvLurN+uEf1po8lUIKjqq9GJLDzRowZhcB2E9mK45Wfmbk1qaqKNL+8P2ng==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>30-70307.sdfa</Filename>
      <Signature>/+TtC2T+HwRSH+ohnpN6MpVJKujh39nQAhpUna7zqz+anLw9EOO0gRDkunF9TegJaUdu4LBBqdleHTwX1BfvFw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>30-70308.sdfa</Filename>
      <Signature>g5p+kSBUKM8Ivlwl/2YZoXFsBuSfpxL08GzKZDSBSlMlVdsMdp7agQA0ZiUXgLSNZHioAP/BRpv4XbRohN80NA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>30-70309.sdfa</Filename>
      <Signature>s0nr05LXzQVcYi8YKS1Ffwrqy3J0mkcsVNxq0Abj88rapdyYan/rA3Yxgx/+aBL1KXIzMu9cfoF1S5t+lEv78Q==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>30-70310.sdfa</Filename>
      <Signature>CVTqSKQ1ty0gwTODiW9WYgQTx3WM+YCkcEIcPePfYTxuCDhTM7hF0w9iNjDh1j3GFCWFNMPx00oDXlCURBecAQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>30-70312.sdfa</Filename>
      <Signature>HnYSNjZA5SXtfIOsPrlOsA4kk7X6pnqIxqHdYCxU5n2GlGz6Mwydy33y50DvvB56FIZ0UNCySSMlIcBVzAOZzA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>30-70313.sdfa</Filename>
      <Signature>1yQB+0LJYIDsJ2e/FFAcwbmI+QrlsXddJ82EpzaH+ivyiwzsIczbFiDw5eYx4o7zcPu0ASvhKQdan19wL/vu6Q==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>30-70314.sdfa</Filename>
      <Signature>HgEYfIXoRwN/YbZ0mx0cqLXTQTU3QfwPWeVx5zdH2FX9guR/v2E+WPi6vBBuYK5TxHIKzF3B49oTTPZIrrkABA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>30-70315.sdfa</Filename>
      <Signature>FpXy9EjjM/d981eGGkwm8xZ0duwf3hQzv50/DEDT/VkT/Y0AR7ZMu5brUO/O1HhzXvrPjsJhQ50Kv8GIl6JOIw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>30-70316.sdfa</Filename>
      <Signature>c9TElYxWq1nAQMPFYz6OyeXYRZ+axEzTS+1SbgY7gOdgVKobH5BTHGqpimAmatAGmyccEWOq6eXiOFDU0JBgpg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>30-70318.sdfa</Filename>
      <Signature>tO8qvRwMz08zrSK6Jocz2BhA4bESvmtBZ3kYGOixjKpkuj4My8DlmivHC6jVKiKOVC+GJ0gZ1vNTVnttXfSR/Q==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>30-70319.sdfa</Filename>
      <Signature>5HXQZFZ330E1GvNgiZICYgDA+RcpSdR9b6pbIWLa/vAObqbvPB9AxLjOAS31gjZoiC6DjunzxUC+4P/fKHg5GA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>30-70320.sdfa</Filename>
      <Signature>XAyofTYa7vPOYIcfNUL3+yp8q/b67suUfZGY3LtTXh1UGatOPezFCbQRgs003a8EtqF0apboevJ/PZYYx7TX+Q==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>30-70321.sdfa</Filename>
      <Signature>IhtFy60itc+G/0ETnJnIGUbDW1IP58AkILCv3PIq5C4iOEu+E+0bgyWbCT5vjon2NF6G75bErPtt9cmHFIja+A==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>30-70322.sdfa</Filename>
      <Signature>Ia00xUU8y7lq+RchQ5lzY2ZDAuymS81P+kNufEEzV54WfRj48p1IAzgXS0naijOY7Qv5yt8mN9Zu2sXfY9W1zA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>30-70600.sdfa</Filename>
      <Signature>zQMex5xGGraKrk7hZaj5EhxVwYmxa1zRmn2X10QigTmFbENLVC9WMEnOdERnqXCnkMrAKJMaYqH3PpnggbjLsg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>30-70616.sdfa</Filename>
      <Signature>gLOSKiE/pPds4nOiXNC9nPrvuWA8kd7KioANBFSqpM/hQH3a0pNXca97MZkZRVNK7uxtLE41p0o5cKw2WTUPWg==</Signature>
    </FileSignature>
  </FileSignatures>
</ImplantLibraryEntry>